A free estimate by our estimator can determine the
correct size of air conditioning system for your home.
Our professional staff of installers will install your
air conditioner as follows:
1.Drop cloths will be used to
cover areas through out your home.
2.If there is an existing air
conditioning unit, it will be pumped down and then the Freon shall be reclaimed
and the unit will be disconnected and removed from premises.
3.The new A coil will be set
into the plenum with new plenum door, and the condenser will be set on a
concrete pad at the location described in the proposal, and the insulated
copper line set will be connected from the A coil to the condenser.
4.A new condensate drain will
be run to existing drain in the floor or sump pump using ¾ PVC.
5.Optional condensate pump
which is available to remove water where there is no place to drain.
6. A new
circuit breaker will be installed matching correct amp draw on condensing unit
and marked in electric panel.
7.Work area will be swept and
cleaned.All debris will be removed from
premises.
8.The a/c unit shall be
started, cycled, and charged with Freon to perform to its highest efficiency.
9.The installer will go
through a checklist to assure no detail will be overlooked.
10.A follow up Quality Control
inspection will be performed within (10) days of installation.
