Servicing the Communities in and around the North West Suburbs....
Free In Home Estimates on Furnaces, Air Conditioning Systems and More....
Approved Comfort Has Been In Business for over 17 Years....
We Provide Fast and Friendly Service....
Where Customers Refer Their Friends
"Keeping You Comfortable 365 Days a Year" is our Pledge to you.
SAFETY, SAVINGS, COMFORT, WITH A PIECE OF MIND
|
We are the only company that performs a 38 point system inspection and maintenance detail and tune up. By delaying a proper cleaning of your air conditioning system, there is a risk of untimely breakdowns, wasted energy expenses.
A proper air conditioning detailing and tune up, will keep your unit running at its optimum efficiency. Factory Fresh is our quest. Approved Comfort`s factory trained technicians will inspect, clean, detail, and tune your comfort system so you can enjoy a care free summer for your family |
MANUFACTURE REQUIRES PREVENTIVE MAINTENANCE
The manufacture now has never been more strict, when it comes to proof of maintenance, in order to fund warranty claims.
Routine maintenance is a must just like changing the oil in your car every 3000 miles. It is proven, with our techniques, energy cost will be reduced along with extending the life of your original air conditioning unit. The investment made to have this procedure completed will be paid back within the year. *depending on hours used
Many homeowners have a hard time seeing the forest through the trees. Invest a little to save a lot.
REGULAR PREVENTATIVE MAINTENANCE INCREASES THE LIFE OF YOUR SYSTEM.
IN THESE TOUGH ECONOMICAL TIMES, YOU SHOULD NOT HAVE TO WORRY ABOUT REPLACEMENT.
SAVINGS OF UP TO 60% IN EFFICIENCY ; THEREFORE, IN TERMS OF ELECTRICAL AND GAS COSTS,
A DETAILING AND ADJUSTMENT CAN PAY FOR ITSELF.
ADJUSTMENTS IMPROVE PERFORMANCE AND CAN BALANCE COMFORT LEVELS
DECREASES YOUR CHANCE OF A COSTLY BREAKDOWNS DURING THE MOST EXTREME CONDITIONED DAYS
ROUTINE DETAILING AND ADJUSTMENTS ARE RECOMMENDED BY THE MANUFACTURER OF YOUR EQUIPMENT
AND BY YOUR UTILITY COMPANY.
OUR 38-POINT DETAILING AND ADJUSTMENT FOR AIR CONDITIONER CLEAN & CHECKS
CHECK OPERATING PRESSURES AND EFFICIENCY
CLEAN CONDENSING COILS
LEVEL CONDENSING UNIT IF NECESSARY
CLEAN CONDENSING UNIT
CHECK REFRIGERANT LEVELS
CHECK TEMPERATURE ACROSS CONDENSING COIL (CALLED SUPERHEAT)
CHECK COMPRESSOR CONTACTOR, CONNECTIONS AND EROSION
CHECK TEMPERATURE READING ACROSS EVAPORATOR COIL ABOVE FURNACE (TD)
CHECK TO MAKE SURE ALL COPPER LINES ARE PROPERLY INSULATED
CHECK TO MAKE SURE THERE ARE NO PLENUM AIR LEAKS BY COIL PENETRATIONS
CHECK VOLTAGE & AMPERAGE TO ALL MOTORS (CONDENSER, FAN MOTOR & BLOWER MOTOR)
LUBRICATE ALL MOVING PARTS
CHECK LOW PRESSURE SWITCH CUT-OFF
CHECK HIGH PRESSURE SWITCH CUT-OFF
CHECK START CAPACITOR & POTENTIAL RELAYS
CHECK BELTS & TENSION;TIGHTEN IF NECESSARY
CHECK FOR VIBRATIONS & NOISE
CHECK THERMOSTAT & WIRING; CALIBRATE IF NECESSARY
CHECK FOR PROPER TEMPERATURE DROP
CHECK THAT CONDENSATE DRAIN IS CLEARED AND DRAINING PROPERLY
CHECK COMPLETE AIR CONDITIONING CYCLE
CHECK & CHANGE FILTERS FOR ALL PIECES OF EQUIPMENT, WHEN NECESSARY; PRICES WILL VARY ON
FILTERS FOR FURNACES, AIR CLEANERS & HUMIDIFIERS DEPENDING ON MODEL
WE WILL LEAVE SERVICE INVOICE WITH CUSTOMER FOR REFERENCE & TECHNICIAN WILL ANSWER ALL
QUESTIONS BEFORE LEAVING CUSTOMERS HOME
And More
|
